Root & install Clockworkmod Recovery on Samsung Galaxy Ace 3 GT-S7270/S7272

Tips and Requirements:

    Tutorial is simply applicable on Samsung Galaxy Ace 3 Mannequin Number GT-S7270 and 7272. Don't try it on another variant.
    Rooting your device will certainly voids your phone warranty, so think before you ink.
    Enable USB Debugging on your phone.
    Rooting your Android phone doesn't wipe or erases information on your device, but it is a good habit to Backup your knowledge saved in your phone before you go for Rooting or installing Custom ROMs.
    Earlier than continuing for the foundation course of, it is extremely beneficial to test your battery status.
    Final however not the least, proceed at your individual risk.

Install Clockworkmod (CWM) recovery on Galaxy Ace 3 S7270/S7272:

Firstly download the Odin Multi Downloader v3.07 from the link given below:

Click here to download.

Download CWM package for Galaxy Ace 3 from the link given below:

Click here to download.

After successfully download both the files on PC, switch off your device completely.

Now you need enter into downloading mode. The same can be done by pressing and holding Volume Down key + Home button + Power key simultaneously until you see a warning message. Press Volume up button to continue. This will land you into downloading mode.

Keeping the phone in downloading mode, connect it to PC using the USB cable.

Launch the Odin Multi Downloader v3.07 software which you’ve downloaded in PC. You’ll get Added message in the Odin’s message window. Also you’ll see one of the ID:COM section is turned blue or green.

If this does not happen then make sure you have properly installed the USB drivers on your computer.

Click PDA tab on the Odin window and locate the recovery .tar file which you’ve downloaded earlier.

Ensure that Auto-Reboot and F.Reset Time is checked. Make sure that you haven’t clicked anywhere else.

Lastly click on the start button to initiate the CWM flashing process. It will take few minutes to finish. Your phone will restart automatically while the process is going on. We recommend to not remove the USB cable until the process completes.

If unfortunately due to some reason phone gets stuck and if fail message appears in the Odin’s message box. In that case disconnect mobile, remove and re-insert battery and then repeat the above procedure again.

As soon as the Pass message appears in the Odin window, safely remove the USB cable from PC.

Switch off your device again. Now let us check whether CWM is properly flashed or not. For that boot the device into recovery mode. The same can be done by pressing and holding Volume Up + Home button + Power button simultaneously until the recovery mode appears.

Now select ‘Wipe data/factory reset’ option followed by the ‘Wipe Cache partition’ option on the recovery mode to wipe all the data and caches from your phone memory.

You can reboot your phone now by selecting ‘reboot system now’ option from the recovery mode itself.

Procedure to Root Samsung Galaxy Ace 3 S7270/S7272:

Download the Root package from the given link below:

Click here to download.

Connect your device to PC, enable USB debugging mode and without extracting transfer it on your phones internal/external memory. Remember not to place it in deep directories.

Now boot your Galaxy Ace 3 into CWM recovery mode. For that firstly switch it off completely. Then press and hold Volume Up + Home button + Power button simultaneously until the recovery mode appears.

Using the volume keys navigate to the Install zip from SD card option. Then on the next screen select Choose from SD card option. This will show all the data on your internal/external memory. Just select the Root (.zip) package file which you have copied earlier. On the next screen select Yes. This will start the Rooting process.