Install Android 4.4.2 KitKat (XXUDND5) On Samsung Galaxy Note 10.1 (GT-N8000)

XXUDND5 Android 4.4.2 has just been out on the Internet for the Galaxy Note 10.1 N8000. This KitKat construct is definitely an official take a look at firmware that has been leaked online. This implies, the primary Samsung Galaxy Note 10.1 can be getting the official Android 4.1.2 KitKat firmware update - something none of us saw it coming. Because of Faryaab, he has been in a position to re-bundle the firmware so that everyone can install it on their tablets. N8000XXUDND5 will be downloaded from the hyperlink given in our tutorial and then installed utilizing all of the instructions given on this guide. You don't want to root Galaxy Note 10.1 or install a customized recovery since we will be using ODIN to flash this firmware. You'll be able to simply set up XXUDND5 Android 4.4.2 on Galaxy Note 10.1 N8000 by following the step-by-step tutorial below, or root this firmware!

As you proceed reading beneath, we are going to guide you thru the way to backup knowledge, some necessary ideas and the complete means of how to replace Galaxy Note 10.1 N8000 to XXUDND5 Android 4.4.2 official take a look at firmware with all of the steps required to do so. This can be a completely unbranded firmware, which implies, you may set up this firmware on any Galaxy Note 10.1 N8000 but can get some extra language packs relying on the region. Don’t forget to learn all the necessary ideas given below. The following tips are necessary as they may assist the set up procedure to go smooth without any issues. Let’s proceed with the tutorial now.

Updating Galaxy Note 10.1 to Official Android 4.4.2 KitKat (XXUDND5)
1) Download and extract the official Android 4.4.2 firmware, which can be found here.
2) Download and extract Odin, which is available here.
3) Launch Odin as an administrator.
4) Boot your Galaxy Note 10.1 into Download mode by urgent the Volume Down and Energy buttons together.

5) Proper click on Odin and launch the applying as an administrator.

6) Utilizing Odin, set up the next information from the .zip archive downloaded earlier:

    A) Add AP_N8000XXUDND5.tar.md5 to AP.

    B) Add BL_N8000XXUDND5.tar.md5 to BL.

    C) Add MODEM_N8000XXUDND2.tar.md5 to CP.

    D) Add CSC_OXA_N8000OXADND5.tar.md5 to CSC.

7) Navigate to the Option submenu in Odin and examine Auto Reboot and F.Reset Time. Uncheck Re-Partition.

eight) Click on Begin and the set up will begin.

9) When the firmware has completed flashing to your Galaxy Note 10.1, your phone will mechanically reboot.

10) Once your Galaxy Note 10.1 restarts, you will officially be running Android 4.4.2 KitKat XXUDND5. Kudos.

Unknown

Add Comment

Samsung